A Burnt Hills mechanic’s straight answer for worried drivers
Mike Sullivan
“I’ve diagnosed thousands of ABS lights right here in Burnt Hills. Let me tell you exactly what I tell every worried customer who calls.”
Quick Answer — Read This First
Yes, you can safely drive to work. Your regular brakes still work normally. However, your anti-lock braking system is disabled — meaning your wheels could lock up if you brake hard on wet or icy roads.
🚨EXCEPTION: If your RED brake warning light is also on, pull over immediately and call for a tow. This indicates a serious brake system failure.
What That Amber ABS Light Actually Means
Your ABS (Anti-lock Braking System) prevents your wheels from locking up during hard braking. When that amber light comes on, it’s telling you the system has detected a fault and temporarily disabled itself.
Here’s the good news: your brakes still work exactly like they did on cars before ABS was invented. You just won’t have that extra layer of protection if you need to slam on the brakes.
The #1 Cause I See in Burnt Hills (It’s Cheap to Fix)
Wheel Speed Sensor
About 70% of ABS lights I diagnose come down to a faulty wheel speed sensor. These little sensors get covered in road grime and salt — especially after our Burnt Hills winters.
💰 Typical cost: $75-150 including diagnosis and part
Other Common Causes:
🔌Wiring Issue
Corroded connectors or damaged wires
🎛️ABS Module
The computer brain of the system
Low Brake Fluid
Could indicate worn pads or a leak
⚙️Tone Ring
The gear the sensor reads from
What to Do Right Now (Step by Step)
Check for the RED brake light
If it’s on, pull over safely and call for help
Test your brakes gently
Find a safe spot and brake slowly — they should feel normal
Drive cautiously
Leave extra stopping distance, especially on wet roads
Schedule a diagnosis this week
Don’t ignore it — the underlying issue could wors
